The AutoSHORE™ does not convert frequency but instead conditions and regulates the dock voltage. The voltage provided to the yacht from the dock pedestal can vary greatly throughout the day due to the load demands of other yachts on the same quay. At peak times this change could be as much as 20%. This fluctuation in voltage can cause damage to onboard electrical distribution equipment such as pumps, air-conditioning compressors and marine electronic equipment resulting in expensive repair costs. Installing an AutoSHORE onboard protects the yacht’s equipment from damage.
The AutoSHORE protects the vessel by regulating the voltage from the dock, preventing any dock fluctuations from reaching the onboard loads. The unit is fully automatic and is microprocessor controlled, continually monitoring the dock voltage. If a large fall in voltage occurs the system will automatically disconnect the output to protect the yacht.
Advanced Power Design
The ShorPOWER AutoSHORE power conditioner utilizes state-of-the-art technology including the latest in power semiconductors and grain oriented transformer technology, all controlled by a high speed digital control system.
The onboard guests do not want to be aggravated by flickering lights, black-outs and generator starts caused by fluctuations in the marina shore power. Regardless of the dock power supply quality the AutoSHORE will always produce stable and reliable power. This reliability is achieved by manufacturing the converter using only the highest quality components and by engineering the converter for actual marine use.
Designed from the ground up, based on years of marine experience, the converter supplied in a lightweight aluminum enclosure, is engineered to operate in the worst marine conditions such as high ambient temperature and humidity.
- Automatically connects to any worldwide marina power system.
- Works with any RCD / GFCI circuit breaker
MAXIMIZE MARINA SHORE POWER SYSTEMS
- Connects to high voltage as well as low voltage.
- Reduced current at start up prevents nuisance trip of marina breaker.
ONBOARD EQUIPMENT PROTECTION
- Provides protection against marina voltage transients.
- Regulated output voltage.
- Generous overload capability so no need to start generator during peak times.
ADVANCED POWER DESIGN
- State of the art power semiconductors and grain oriented transformers.
- Extensive protection and diagnostic system.
EASY TO USE
- Fully automatic operation.
- Will automatically start as soon as power is plugged in.
- Unit can be controlled and monitored switch and status LEDs.
- Remote control and monitoring via Modbus.
|Voltage||187 to 264 Volts|
|Frequency||45 to 66 Hz|
|Power Factor||≥ 0.95|
|Output||Power Ratings||1 Phase: 12 kVA|
|Frequency||45 to 66 Hz|
|Overload||110% for 1 hours
150% for 1 minute
200% for 6 seconds
|Environment||Protection||Over/Under Voltage, Short Circuit, Over Load and Over Temperature|
|Temperature Range||0°C to +50°C|
|Humidity||0% to 95%
Onboard ShorPOWER Conditioners
|AutoSHORE 12||AutoSHORE 30|
|Input Voltage||187V - 264V||187V - 514V|
|Alternate Input Voltage|
|Output Voltage||230V - 240V||230V - 240V|
|Extended Operating Temperature|
|Dual Shore Cord Input|
|Communications Data Link|
The safest, most reliable and cost-effective marine electrical power system starts with a quality design
Select Atlas’ team of highly experience and degreed marine Electrical Engineers to provide the optimum electrical power system design for your vessel. Their many years of…
Detailed Documentation Package
The engineering design team at Atlas Marine Systems provides a detailed documentation package that assists the shipyard in identifying the electrical power system components and equipment…
Atlas — Your single-source electrical supplier for design and equipment
The Atlas design service is an enhancement to an electrical system using Atlas TecPOWER™ AC and DC switchboards and ShorPOWER frequency, voltage and phase converters. Intimate…