Product Comparison Chart

Smiley face

The AutoSHORE does not convert frequency but instead conditions and regulates the dock voltage. The voltage provided to the yacht from the dock pedestal can vary greatly throughout the day due to the load demands of other yachts on the same quay. At peak times this change could be as much as 20%. This fluctuation in voltage can cause damage to onboard electrical distribution system such as pumps, air-conditioning compressors and marine electronic equipment resulting in expensive repair costs. Installing an AutoSHORE onboard protects the yacht’s equipment from damage.

Stable Power
The AutoSHORE protects the vessel by regulating the voltage from the dock, preventing any dock fluctuations from reaching the onboard loads. The unit is fully automatic and is microprocessor controlled, continually monitoring the dock voltage.  If a large fall in voltage occurs the system will automatically disconnect the output to protect the yacht.

Advanced Power Design
The ShorPOWER®AutoSHORE power conditioner utilizes state-of-the-art technology including the latest in power semiconductors and grain oriented transformer technology, all controlled by a high speed digital control system.

Reliable Power
The onboard guests do not want to be aggravated by flickering lights, black-outs and generator starts caused by fluctuations in the marine shore power. Regardless of the dock power supply quality the AutoSHORE will always produce stable and reliable power. This reliability is achieved by manufacturing the marine shore power converter using only the highest quality components and by engineering the converter for actual marine use.

Maximize Marina Power
An important feature of the AutoSHORE is its ability to automatically connect to high voltage as well as low voltage.  A typical marina may have limited low voltage single phase available but by connecting to two of the phases of a high voltage three phase supply the amount of power available from the dock is almost doubled.

Marine Engineered
Designed from the ground up, based on years of marine experience, the converter supplied in a lightweight aluminum enclosure, is engineered to operate in the worst marine conditions such as high ambient temperature and humidity.

FEATURES

WORLDWIDE POWER

  • Automatically connects to any worldwide marina power.
  • Works with any RCD /GFCI circuit breaker

MAXIMIZE MARINA POWER

  • Connects to high voltage as well as low voltage.
  • Reduced current at start up prevents nuisance trip of marina breaker.

ONBOARD EQUIPMENT PROTECTION

  • Provides protection against marina voltage transients.
  • Regulated output voltage.
  • Generous overload capability so no need to start generator during peak times.

ADVANCED POWER DESIGN

  • State of the art power semiconductors and grain oriented transformers.
  • Extensive protection and diagnostic system.

EASY TO USE

  • Fully automatic operation.
  • Will automatically start as soon as power is plugged in.
  • Unit can be controlled and monitored switch and status LEDs.

OPTIONS

  • Remote control and monitoring via Modbus.

SPECIFICATIONS

Smiley face

AutoShore 30 Specification Wheel

Specifications

InputType1 Phase
Voltage187 to 264 Volts
342 to 514 Volts
Frequency 45 to 66 Hz
Shore CordsSingle
Power Factor≥ 0.95
OutputPower Ratings1 Phase: 30 kVA
Frequency 45 to 66 Hz
Overload110% for 1 hours
150% for 1 minute
200% for 6 seconds
EnvironmentProtectionOver/Under Voltage, Over Current,
Short Circuit, Over Load and Over Temperature
Temperature Range0°C to +50°C
Humidity0% to 95%
Non-Condensing
EnclosureIP22

PRODUCT COMPARISON CHART

Want to see details of multiple products? Check out the comparison chart for side by side information for easy viewing.

More

DESIGN SERVICES

The safest, most reliable and cost-effective marine electrical power system starts with a quality design

Select Atlas’ team of highly experience and degreed marine Electrical Engineers to provide the optimum electrical power system design for your vessel. Their many years of…

More

Detailed Documentation Package

The engineering design team at Atlas Marine Systems provides a detailed documentation package that assists the shipyard in identifying the electrical power system components and equipment…

More
Atlas — Your single-source electrical supplier for design and equipment

The Atlas design service is an enhancement to an electrical system using Atlas TecPOWER AC and DC switchboards and ShorPOWER frequency, voltage and phase converters. Intimate…

More