Why You Should Add an Isolation Transformer to Your Boat

  • Isolation transformer for a boat

Need of an Isolation Transformer for a Boat

If you could install a single-engine in your boat that would make your boat uncomfortable for swimmers, prevent galvanic rust, stop worrying about the depletion of coastal polarity, and provide clean AC power to sensitive electrical equipment, would you want it? If you answered yes, go ahead.

(Galvanic corrosion: Galvanic corrosion, is an electrochemical process in which one metal corrodes more than another metal connected by the electrolyte.)

Isolation transformers are a way to achieve all of those goals. The isolation converter takes the energy of your often marginal and unpredictable 120VAC marina and converts it to clean energy. And building a riding power greatly enhances the safety of those in your boat or swimming nearby.

Shore power is an effective way of reducing air emissions and improving local air quality. Shore power, also known as cold-ironing or alternative marine power, is the process of providing electrical power from the shore to a ship while it’s docked, thereby allowing a ship’s auxiliary engines to be turned off and the burning of diesel fuel to cease.

Why have an Isolation Transformer

Marine isolation transformers or marine converters are the only way to completely eliminate the risk of galvanic corrosion between the hull of a ship and other metal objects. The marine isolation transformer is a flexible material that can be used to provide galvanic separation in coastal energy systems, improve electrical safety and eliminate corrosion caused by roaming waves.

When fitted with a separation mode, the transformer also serves as a barrier to galvanic corrosion, which may be the result of interaction with surrounding vessels, metalheads, or other submarine and grounded objects.

Other isolation transformers can also be used to increase the coastal voltage to deal with power outages. A shore power converter allows a ship to be powered by the port’s electrical grid, even though a ship may have a different operating voltage, typical for international travels of ships. Another common use is to adjust the voltage of the ship’s internal power system to high or low shores.

VictronEnergy (@Victron_Energy) / Twitter

Purpose, it fulfills

  • The first is isolating the secondary from the ground (earth)
  • The second is to provide a step up or step down of line (mains) voltages
  • The third is to reduce line noise being transmitted from the primary to the secondary or vice versa

How Isolation Transformer works

When a transformer is installed, isolation or polarization, it acts as a power source, such as a service company, such as a generator or inverter, in that a neutral and green safety area is connected or attached to the transformer, making coastal soil unnecessary. The ground is from the transformer and not from the shore. This is the only time your boat can safely cross the AC coast.

The Isolation transformer operates in both directions. If your boat has current lost problems and you board the ELCI breaker on the pedestal. The isolation transformer will keep the lost current limited to your boat and keep you from getting out of your boat with the bottom rope.

2022-05-30T07:47:40-05:00By |Uncategorized|Comments Off on Why You Should Add an Isolation Transformer to Your Boat

Share This Story, Choose Your Platform!

About the Author:

Go to Top